The most common reasons a commercial door won't close or latch, and what to do about it.
A storefront or commercial door that won't close on its own is more than an annoyance. It can leave your business unlocked overnight, let heating and cooling escape, and become a safety issue if it's an exit door. The good news is that most of the time the cause is one of a handful of common problems, and many of them are quick fixes for an experienced door technician.
The closer is the arm or concealed unit that pulls the door shut. Closers have adjustment valves for closing speed and the final "latch" speed. Over time, and especially when temperatures swing, those settings drift and the door may stop just short of latching. If you see oil on the closer body or on the floor below it, the closer is leaking and usually needs to be replaced rather than adjusted.
Heavy aluminum and glass storefront doors put a lot of strain on their hinges, pivots, or continuous hinge. When they wear or the screws loosen, the door sags. A sagging door rubs the frame or the threshold and stops before it can latch. Look for a gap that is wider at the top of the door than at the bottom, or scrape marks along the frame.
If the door swings all the way to the frame but bounces back or won't catch, the latch is probably hitting the strike plate in the wrong spot. This often happens after a hinge starts to sag or after the building settles a little.
On exit doors, a sticking panic bar or a worn latch inside the exit device can keep the door from latching even when the closer is working fine. These devices protect people in an emergency, so they should be repaired properly rather than propped or disabled.
Damaged weatherstripping, a bent or raised threshold, a mat that slid under the door, or debris in the floor pivot can all stop a door short. These are worth checking first because they're the easiest to spot.
In buildings with strong airflow, or on windy days, air pressure can hold a door open against its closer. If the problem comes and goes with the weather or when the HVAC kicks on, the closer may need to be adjusted for your entrance.
Avoid taking the closer apart or loosening the arm under tension. Closers store a lot of spring force, and pivots and exit devices are easy to damage without the right tools.
If the door won't latch, won't lock, has a leaking closer, or is an exit door that doesn't close reliably, it's time to get it looked at. Fixing it early usually costs less than waiting until a hinge fails or the glass gets damaged from the door slamming.
Skip the phone tag. Send a quick request with a photo of the door and the closer, and our digital response team will get you a fast, free quote from an experienced commercial door professional.
Small speed adjustments are possible, but closers are under spring tension and the valves are easy to over-turn, which can ruin the closer. If the closer is leaking oil, adjustment won't fix it and it will need to be replaced.
Closer fluid gets thicker in cold weather, which slows the door down. A closer that is borderline in warm weather may stop before latching once it gets cold.
It can be. A door that doesn't latch may leave your building unsecured, and exit doors with panic hardware need to work reliably. It's best to get it repaired rather than propped or disabled.
No. KC Door Repair focuses on commercial doors, including storefront, glass, and automatic doors for businesses and commercial properties.
Send a photo of the door and closer for a fast, free estimate anywhere in the KC metro.
816-290-6446 Request Quote OnlineSend a quick request for a free estimate. Our digital response team gets back to you fast.
816-290-6446